Repair Guide:

Read all instructions before using the ZAP!

To have the best experience with your Ding Zap! we recommend you review our instructions outlined here. These easy-to-follow steps will ensure your Ding Zap! securely adheres to your board for a longer-lasting watertight seal that will not leave behind any sticky residue when it is time to remove the patch. 
 
Will Ding Zap! work if you do not follow our guide? Probably, but why take the chance when you have all the tools to use it correctly right in front of you.
 
Please refer to our FAQ if you have any questions about Ding Zap!, how to use it, or if it is right for you. Feel free to reach out directly via email or phone if our FAQ has not answered your questions. We are here to help.

Step 1

Lightly sand the area around the ding to make sure its smooth and free of any sharp surfaces.

Step 2

Thoroughly clean the damaged region slightly larger than the ZAP! with the cleaning wipe provided.

Step 3

Peel the backer from the ZAP! and apply the sticky side over the ding making sure there’s no trapped air bubbles.

Step 4

Next peel the facing from the ZAP! that’s already been applied to the board.

Step 5

Thoroughly clean the damaged region slightly larger than the ZAP! with the cleaning wipe provided.